Operation of walnut walnut sheller:

1. Check the connection, drive parts are loose, there is no abnormal phenomenon.

2. Is the power supply and the wiring of the electrical appliance in good contact.

3. Before the factory roll gap has been adjusted, because the size of walnut is different, according to the size of the shape to adjust the size of the gap.
4.Gap adjustment:

Small: the top two each intermediate shaft nut locking, loosen the nut twist axis, roll up regulation big gap broken shell is larger, smaller gap shell breaking down smaller, adjusted again after the nut two mutually locked and fixed.

Large: the speed of regulation and control, the faster the speed, the smaller the broken shell, the slower the speed, the greater the broken shell.
 

Because of different varieties of walnut shell with different thickness, before starting to put a small amount of walnut shell to see effect, by adjusting the roller gap size or speed, high integrity to achieve after the shell is broken kernel rate. Reset the small gap unhulled nut after removal. When the deceleration motor is used, attention should be paid to oiling, and the transmission parts should be checked and fastened in time so that they can be used normally.

If you need a walnut shelling machine,welcome to contact me with freely,i will send the machine detail and quotation to you.
 

Pre:What is Peanut Chopping Cutting Machine? Next:Pumpkin Seeds Hulling Machine Manufacturer In China